Universal-air-tools UT5762 User Manual download pdf

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Important

Operator Instructions

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Tel No Fax No(01494) 883300 (01494) 883237

Model No/Nos Serial No

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use of the Tool

This tool is designed to be used with appropriate cutting discs only..

The tool should not be used with any other type of abrasive disc or

wheel. It must never be used with saw blades or other cutting devices.

Do not use the tool outside the design intent. Never modify the tool for

any other purpose, or for its use as a disc cutter without first seeking

advice from the manufacturer or an authorised representative.

Work Stations

The tool should only be used as a hand held hand operated tool. It is

always recommended that the tool is used when standing on a solid

floor. It can be used in other positions but before any such use the

operator must be in a secure position having a firm grip and footing and

be aware of the safety rules to be obeyed when using the grinder.

Cut Off Tool

UT5762

20,000

3/8 10 30 10

1.7

0.8

Page No 1

Noise Level Sound Pressure Level 86.0 dB(A)

Test Method Tested in accordance with Pneurop

test code PN8NTC1

Vibration Level

Test Method Tested in accordance with ISO

standard 8662

Less than 2.5

Metres / Sec²

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Yes

Use - Safety Boots

Use - Breathing Masks

Yes

Use - Ear Protectors

Yes

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a

measured air pressure at the tool of 90

p.s.i./6.3 bar when the tool is running with the

trigger/lever fully depressed. Use

recommended hose size and length. It is

recommended that the tool is connected to

the air supply as shown in figure 1. Do not

connect the tool to the air line system without

incorporating an easy to reach and operate air

shut off valve. The air supply should be

lubricated. It is strongly recommended that an

air filter, regulator, lubricator (FRL) is used as shown in Figure 1 as this

will supply clean, lubricated air at the correct pressure to the tool.

Details of such equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by shutting off

the air supply to the tool, depressurising the line by pressing the trigger

on the tool. Disconnect the air line and pour into the intake bushing a

teaspoonful (5ml) of a suitable pneumatic motor lubricating oil

preferably incorporating a rust inhibitor. Reconnect tool to air supply

and run tool slowly for a few seconds to allow air to circulate the oil. If

tool is used frequently lubricate on daily basis and if tool starts to slow or

lose power.

It is recommended that the air pressure at the tool whilst the tool is

running is 90 p.s.i./6.3 bar.

1 2 3 4

Summary of Contents

Page 1 - Cycles Per Min

Read these instructions carefully before installing, operating,servicing or repairing this tool. Keep these instructions in a safeaccessible place.Imp

Page 2 - Tool Maintenance

OperatingThe lever is the on/off valve for the tool. Connect to a suitable air supplyand ensure that the air pressure, measured at the tool inlet, wit

Page 3 - UT5762 Cut Off Tool

UT5762 Cut Off ToolPage No 3Mar 2012 Ver 1.00Ref No Part No Description1 5762-01 Hose Adaptor2 5762-02 Muffer Disc3 5762-03 Valve Spring4 5762-04

Page 4

DistributorNotesPage No 4This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Compan

Comments to this Manuals

No comments

Universal-air-tools UT5762 User Manual

Browse online or download User Manual for Tools Universal-air-tools UT5762. Universal Air Tools UT5762 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT5762