Universal-air-tools UT5720A User Manual download pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per

el No Fax No(01494) 883300 (01494) 883237

Model No/Nos Serial No (if any)

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use Of The Tool

This die grinder is primarily designed for use with bonded

abrasive mounted point grinding wheels. It may also be used

with steel rotary files and carbide burrs provided their speed

rating matches the speed of the grinder.

This tool should not be fitted with cutting off wheels, saw

blades, drill bits, etc. If there is any doubt about the correct

use of this product contact your supplier for advice.

Also make sure that the shank size of the attachment to be

driven matches with the collet size fitted in the grinder and

that the maximum allowed running speed of the attachment

exceeds that marked on the grinder.

There are special rules governing the use of bonded abrasive

mounted point grinding wheels - for details see section

"Operating".

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured

air pressure at the tool of 90 p.s.i./6.3 bar when the tool

is running with the lever/trigger fully depressed. Use

recommended hose size and length. It is recommended that

the tool is connected to the air supply as shown in figure

1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve.

The air supply should be lubricated. It is strongly

recommended that an air filter, regulator, lubricator (FRL) is

used as shown in Figure 1 as this will supply clean, lubricated

air at the correct pressure to the tool. Details of such

equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by

shutting off the air supply to the tool, depressurising the line

Work Stations

The tool should only be used

as a handheld hand operated

tool. It is always recom-

mended that the tool is used

when standing on the solid

floor. It can be used in other

positions but before any such

use, the operator must be in

a secure position having a firm

grip and footing and be aware

of the extra safety precautions

that must be observed when

using Grinding Machines.

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

bar

100

PSI

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Yes

Use - Safety Boots

Use - Breathing Masks

Yes

Use - Ear Protectors

Yes

Page No 1

Die Grinder

1/4” Capacity

UT5720A

1.23

0.62 3/8 10 30 10

22,000

Includes - Foreseen Use, Work Stations, Putting Into Service,

Operating, Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a

safe accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Noise Sound Pressure Level 86.0 dB(A)

est Method Tested in accordance with

Pneurop test code PN8NTC1 and ISO

ibration

est Method Tested in accordance with ISO

standard 8662/1 & 8662/17

Less than 2.5

Metres / Sec²

Sound Power Level 99.0 dB(A)

1 2 3 4

Summary of Contents

Page 1 - Work Stations

Manufacturer/Supplier Product TypeRPMCycles Per Tel No Fax No(01494) 883300 (01494) 883237Model No/Nos Serial No (if any)Product Nett WeightlbsKgRecom

Page 2 - Reassembly

OperatingSelect a suitable mounted point that has a free running speed higher than the maximum running speed marked on the tool. Make sure that the di

Page 3 - Ref No Part No Description

UT5720A Rear Exhaust Die GrinderPage No 3Sep 2003 Ver 1.0Ref No Part No Description1 729262 Valve Screw2 729073 O-Ring3 729088 O-Ring4 729282 Air Regu

Page 4

DistributorNotesPage No 4Safety Rules When Using A Die Grinder1) Read all the instructions before using this tool. All operators must be fully trained

Comments to this Manuals

No comments

Universal-air-tools UT5720A User Manual

Browse online or download User Manual for Tools Universal-air-tools UT5720A. Universal Air Tools UT5720A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT5720A