Universal-air-tools UT4X (4X) User Manual download pdf

Manufacturer/Supplier Product Type

Tel No Fax No(01494) 883300 (01494) 883237

Model No/Nos Serial No

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use of the Tool

These tools are designed for the purpose of chipping, riveting and

scaling of metals and stone. In general terms a reciprocating free

piston in the cylinder of the tool imparts a blow to the chisel or

working attachment. A list of suitable equipment to use with these

tools can be provided by the manufacturer. Do not use these tools for

any other purpose than that for which they were designed without

consulting the manufacturer or the manufacturer’s authorised

representative.

Do not modify these tools for their use as a chipper etc. or for any

other purpose without first agreeing any such modification with the

manufacturer or the manufacturer’s authorised representative.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger

fully depressed. Use recommended hose size and length. It is

recommended that the tool is connected to the air supply as shown

in figure 1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve. The air

supply should be lubricated. It is strongly recommended that an air

filter, regulator, lubricator (FRL) is used as shown in Figure 1 as this will

supply clean, lubricated air at the correct pressure to the tool. Details

of such equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by shutting

off the air supply to the tool, depressurising the line by pressing the

trigger on the tool. Disconnect the air line and pour into the intake

bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating

Work Stations

These tools should only be used as handheld, hand operated tools. It

is always recom-

mended that the

tools are used when

standing on a solid

floor. It can be used

in other positions

but before any such

use, the operator

must be in a secure

position having a

firm grip and footing

and be aware of a

reaction force on

the hand as result of

the tool doing work.

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Yes

Use - Safety Boots

Use - Breathing Masks

Use - Ear Protectors

Yes

Page No 1

0.401 Shank Air

Hammers

UT2X (2X), UT3X (3X) &

UT4X (4X)

(See Page 4)

3/8 10 30 10

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Noise Level Sound Pressure Level (See Page 4)

Test Method Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Sound Power Level (See Page 4)

Vibration Level

Test Method Tested in accordance with ISO

standards 8662/1 Parts 1 & 2

(See Page 4)

1 2 3 4

Summary of Contents

Page 1 - Work Stations

Manufacturer/Supplier Product TypeTel No Fax No(01494) 883300 (01494) 883237Model No/Nos Serial NoProduct Nett WeightlbsKgRecommended Use OfBalancer O

Page 2 - Operating

Dismantling & Assembly InstructionsDisconnect tool from air supplyGrip handle (1) in a vice with soft jaws and unscrew either retainerspring (21)

Page 3 - Ref No Part No Description

UT2X (2X), UT3X (3X) & UT4X (4X) 0.401” Diameter Shank Air HammersPage No 3May 1999 Ver 1.2Ref No Part No Description1 852001 Handle2852002 Cylind

Page 4 - Technical Specifications

DistributorNotesPage No 4AccessoriesThis document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air

Related models: UT3X (3X) | UT2X (2X) |

Comments to this Manuals

No comments

Universal-air-tools UT4X (4X) User Manual

Browse online or download User Manual for Tools Universal-air-tools UT4X (4X). Universal Air Tools UT4X (4X) User Manual

Summary of Contents

Related models: UT3X (3X) | UT2X (2X) |

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT4X (4X)