Universal-air-tools UT57A User Manual download pdf

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Important

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Model No/Nos Serial No

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Page No 1

Spray Gun - Syphon Type

(1 litre cup) 1.8mm

UT57A

1.85

0.84 5/16 8 30 10

N/A

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Work Stations

The spray gun should only be used as a handheld hand-operated

device. It is always recommended that the spray gun is used when

standing on the solid floor. It can be used in other positions provided the

spray gun is kept near vertical and the operator has a firm grip and

footing. Any work station must take account that the liquid being

sprayed should not be breathed in and the liquid can be highly

flammable and spraying should never be undertaken near naked flames

or hot surfaces. Do not smoke. It should also take account that not all of

the liquid being sprayed will be applied to the object being sprayed and

account must be taken that this surplus, i.e. “over spray” will be

deposited in the surrounding area.

Foreseen Use of Tool

This product is designed for the purpose of applying liquids in the form

of paint, lacquers, etc. to a surface for the purpose of providing a

decorative or protective finish. It must not be used for or modified for

any other purpose unless first consulting the manufacturer or an

authorised representative.

Tel No Fax No(01494) 883300 (01494) 883237

Noise Level Sound Pressure Level TBA dB(A)

Test Method Tested in accordance with ISO

Standard 3744

Sound Power Level TBA dB(A)

N/A

Vibration Level

Test Method Vibration testing not required for a

spray gun

N/A

Metres / Sec²

Operating

The Spray Gun is a handheld syphon type

compressed air atomising spray gun

suitable for use with most liquids for paint

spray finishing or the application of

surface coatings. It is a non bleeder type

with external mix nozzle air cap assembly

and full control for material application

and spray pattern between round and fan

(see later). The gun is fitted with a quart (2 pints/1.13 litres) syphon cup

complete with paint strainer.

Use 1.8mm diameter nozzle for polymer paints, oil base paints, epoxy

paints for metals, acrylic lacquers, urethane.

Before spraying any material first read any instructions concerning its

safe use and if nothing is available check with the manufacturer about its

use and the need to use personal safety equipment.

Prepare the paint in accordance with the manufacturer’s

recommendations and place in syphon container. Do not overfill.

Connect the gun to a clean, moisture/oil free air supply at the right

pressure. Fit container to the gun and lock in position. Use the material

adjustment control screw (18) to adjust material flow and the fan

adjustment assembly (17) to adjust from round to fan spray pattern.

Make all adjustments before attempting to spray the work piece.

Note the spray gun can work at pressures of between 30 and 70 psi

and the air consumption is approximately for these pressures from 3 to

7 cfm.

For advice on spraying, using, cleaning, etc., the spray gun, see

attached sheets 4 to 7.

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Yes

Use - Safety Boots

Use - Breathing Masks

Yes

Use - Ear Protectors

Air Pressure

Recommended Working

2.06

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

4.83

bar

PSI

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Operating

Read these instructions carefully before installing, operating,servicing or repairing this tool. Keep these instructions in a safeaccessible place.Imp

Page 2 - Handling the Spray Gun

Page No 2Safety Rules when Using or Cleaning aSpray GunWarningMany fluids that will clean painted surfaces are very flammable andthe vapours should n

Page 3 - UT57A Spray Gun - Syphon Type

UT57A Spray Gun - Syphon TypePage No 3May 2008 Ver 1.10Ref No Part No Description15 9000001200 Fluid Adj.Guide Set16 9940000101 Fluid Needle 1.316 994

Page 4 - Common Errors in Handling

Page No 4Terms to Describe a Poor Paint Finish1) Orange PeelThis is a finishing effect so called because it resembles thetexture and appearance of ora

Page 5 - Faults & Remedies

Page No 5Air leaking from Spray GunCause Remedy- Dirt on air valve seating - Remove and clean- Worn or damaged seating - Replace- Broken air valve spr

Page 6 - Spray Gun Paint Patterns

Page No 6Spray Gun Paint PatternsFaults and RemediesTop Heavy SprayCausea) Wing holes partially obstructedb) Damaged or obstruction of materialn

Page 7 - Advice on Cleaning Spray Guns

Page No 7Advice on Cleaning Spray GunsWhen used with a cup, thinner orsuitable solvent should be syphonedthrough the gun by inserting tube

Page 8

DistributorNotesPage No 8AccessoriesDeclaration of ConformityUniversal Air Tool Company LimitedUnit 8, Lane End Industrial Park, High Wycombe, Bucks,

Comments to this Manuals

No comments

Universal-air-tools UT57A User Manual

Browse online or download User Manual for Tools Universal-air-tools UT57A. Universal Air Tools UT57A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT57A