Universal-air-tools UT8777 User Manual download pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Tel No Fax No

Model No/Nos Serial No

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use of Tool

This tool is designed for the purpose of light surface

finishing/preparation. It is particularly useful for the preparation of

painted surfaces. It can be used with bristle discs or with coated

abrasive disc pads.

Do not use the tool for any other purpose than that for which it has

been designed before first seeking advice from the manufacturer or

an authorised representative.

Do not modify the tool for any other or its use as a paint surfacing tool

unless first discussing and having approval for any modification from

the manufacturer or an authorised distributor.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the

lever/trigger fully depressed. Use recommended hose size and

length. It is recommended that the tool is connected to the air supply

as shown in figure 1. Do not connect the tool to the air line system

without incorporating an easy to reach and operate air shut off valve.

The air supply should be lubricated. It is strongly recommended that

an air filter, regulator, lubricator (FRL) is used as shown in Figure 1 as

this will supply clean, lubricated air at the correct pressure to the tool.

Details of such equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by shutting

off the air supply to the tool, depressurising the line by pressing the

lever/trigger on the tool. Disconnect the air line and pour into the

intake bushing a teaspoonful (5ml) of a suitable pneumatic motor

Work Stations

The tool should only be used as a handheld hand operated tool. It is

always recommended that the tool is used when standing on the solid

floor. It can be

used in other po-

sitions but before

any such use, the

operator must be

in a secure posi-

tion having a firm

grip and footing

and be aware of

the extra safety

precautions that

must be observed

when using Grind-

ing Machines.

Page No 1

Right Angle Paint

Surfacing Tool

UT8777

1.32

0.60 3/8 10 30 10

25,000

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Noise Level Sound Pressure Level 84.7 dB(A)

Test Method Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Sound Power Level 95.6 dB(A)

Vibration Level

Test Method Tested in accordance with ISO

standard 8662 Parts 1 & 8

Less than 2.5

Metres / Sec²

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

(01494) 883300 (01494) 883237

Personal Safety Equipment

Use - Safety Glasses Yes

Use - Safety Gloves Yes

Use - Safety Boots

Use - Breathing Masks Yes

Use - Ear Protectors Yes

Air Pressure

Recommended Working 6.3 bar 90 PSI

Recommended Minimum n/a bar n/a PSI

Maximum 7 bar 100 PSI

1 2 3 4

Summary of Contents

Page 1 - Maximum 7 bar 100 PSI

Manufacturer/Supplier Product TypeRPMCycles Per MinTel No Fax NoModel No/Nos Serial NoProduct Nett WeightlbsKgRecommended Use OfBalancer Or SupportRec

Page 2 - Surfacing Tool

OperatingThe tool can be fitted with conventional coated abrasive discs orabrasive discs that are suitable for surface preparation, particularlypaint

Page 3 - Ref No Part No Description

UT8777 Right Angle Paint Surfacing ToolPage No 3May 98 Ver 1.0Ref No Part No Description1 0308C001 Throttle Lever2 0308C002 Spring Pin3 0308C003 Housi

Page 4 - Technical Specification

DistributorNotesPage No 4AccessoriesDeclaration of Conformitydeclare under our sole responsibility that the productModel UT8777 Right Angle Paint Surf

Comments to this Manuals

No comments

Universal-air-tools UT8777 User Manual

Browse online or download User Manual for Tools Universal-air-tools UT8777. Universal Air Tools UT8777 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT8777