Universal-air-tools UT8705-DC User Manual download pdf

UT8705 UT8705-DC

1.6 1.7 lbs

0.73 0.76 Kg

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Important

Operator Instructions

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Model No/Nos Serial No

Product Nett Weight Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Page No 1

Dual Action Sander -

3”(75mm) Pad

UT8705 - Non Vacuum

UT8705-DC - Central Vacuum

3/8 10 30 10

11,000

Work Stations

The tool should only be used as a

hand held hand operated tool. It

is always recommended that the

tool is used when standing on a

solid floor. It can be used in other

positions but before any such

use the operator must be in a se-

cure position having a firm grip

and footing and be aware of the

safety rules to be obeyed when

using the sander.

Foreseen Use of Tool

This tool is designed for the purpose of cleaning or sanding of a variety

of materials typically metal, wood, plastic materials, etc. The dual rotary

orbital action reduces the amount of abrasive grinding marks and

hence is primarily a finishing sanding tool. It can be used with a variety of

grades of 75 mm (3” diameter) abrasive discs which, according to pad

fitted to the tool, can be self adhesive or Velcro attached. If fitted to the

dust collecting system this should always be used. The system may be

integral or required to be fixed to an external vacuum source.

The machine fitted with dust collection should not be used with water.

If use with water is required, water can act as a dust suppressor and the

dust collector would not be required.

Do not use the tool for any other purpose to that for which it has been

designed and use only abrasive discs as described.

Do not modify the tool for any other use or for its use as a sander without

first consulting the manufacturer or his authorised distributor.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the

trigger/lever fully depressed. Use recommended hose size and length.

It is recommended that the tool is connected to the air supply as shown

in figure 1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve. The air

supply should be lubricated. It is strongly recommended that an air filter,

regulator, lubricator (FRL) is used as shown in Figure 1 as this will supply

clean, lubricated air at the correct pressure to the tool. Details of such

equipment can be obtained from your supplier. If such equipment is not

used then the tool should be lubricated by shutting off the air supply to

the tool, depressurising the line by pressing the trigger on the tool.

Disconnect the air line and pour into the intake bushing a teaspoonful

(5ml) of a suitable pneumatic motor lubricating oil preferably

Test Method

Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Vibration Level

Test Method

Tested in accordance with ISO

standards 8662 Parts 1 & 8

Less than 2.5

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Tel No

Fax No

(01494) 883300

(01494) 883237

Metres / Sec²

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Use - Safety Boots

Use - Breathing Masks

Yes

Use - Ear Protectors

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

Noise Level

Sound Pressure Level 80.0 dB(A)

1 2 3 4

Summary of Contents

Page 1 - UT8705-DC - Central Vacuum

UT8705 UT8705-DC1.6 1.7 lbs0.73 0.76 KgRead these instructions carefully before installing, operating,servicing or repairing this tool. Keep these ins

Page 2 - Safety Rules For A Sander

Page No 2incorporating a rust inhibitor. Reconnect tool to air supply and run toolslowly for a few seconds to allow air to circulate the oil. If tool

Page 3 - Ref No Part No Description

UT8705 & UT8705-DC Dual Action SandersPage No 3Mar 2006 Ver 1.00Ref No Part No Description23 UT-A-23 Pin24 UT-OB-22 Cylinder25 UT-OB-24 O-Ring26 U

Page 4

NotesPage No 4AccessoriesDeclaration of ConformityUniversal Air Tool Company LimitedUnit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, E

Related models: UT8705

Comments to this Manuals

No comments

Universal-air-tools UT8705-DC User Manual

Browse online or download User Manual for Tools Universal-air-tools UT8705-DC. Universal Air Tools UT8705-DC User Manual

Summary of Contents

Related models: UT8705

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT8705-DC