Universal-air-tools UT8807B-1/2 User Manual
Browse online or download User Manual for Tools Universal-air-tools UT8807B-1/2. Universal Air Tools UT8807B-1/2 User Manual
- Page / 4
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Manufacturer/Supplier Product Type
RPM
Cycles Per Min
Tel No Fax No(01494) 883300 (01494) 883237
Model No/Nos Serial No
Product Nett Weight Recommended Use Of
Balancer Or Support
Recommended Hose Bore
Size - Minimum
Recommended Max
Hose Length
Ins M/M Ft M
Foreseen Use Of Tool
This drill is designed for the purpose of drilling holes in all types of
materials, i.e. metals, wood, stone, plastics etc. using drilling bits
designed for this purpose. It may be used with other forms of cutting
tools, polishing devices or for sanding using coated abrasive products.
Before using any such products first check with the manufacturer their
suitability for use with this type of drill. Do not use bonded abrasive
products (i.e. grinding wheels) or saw blades or any device which has
a permitted safe working speed less than the free speed of the drill.
Do not use this drill for any other purpose than that specified without
consulting the manufacturer or the manufacturer's authorised supplier.
Putting Into Service
Air Supply
Use a clean lubricated air supply that will give a measured air pressure
at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger
fully depressed. Use recommended hose size and length. It is
recommended that the tool is connected to the air supply as shown
in figure 1. Do not connect the tool to the air line system without
incorporating an easy to reach and operate air shut off valve. The air
supply should be lubricated. It is strongly recommended that an air
filter, regulator, lubricator (FRL) is used as shown in Figure 1 as this will
supply clean, lubricated air at the correct pressure to the tool. Details
of such equipment can be obtained from your supplier. If such
equipment is not used then the tool should be lubricated by shutting
off the air supply to the tool, depressurising the line by pressing the
trigger on the tool. Disconnect the air line and pour into the intake
bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating
Work Stations
The tool should only be used as a handheld hand operated tool. It is
always recommended that the tool is used when standing on the solid
floor. It can be
used in other
positions but
before any such
use, the opera-
tor must be in a
secure position
having a firm
grip and footing
and be aware
that the drill can
develop a
torque reaction
see section
"Operating".
No
Air Pressure
Recommended Working 6.3 bar 90 PSI
Recommended Minimum n/a bar n/a PSI
Maximum 7.0 bar 100 PSI
Personal Safety Equipment
Use - Safety Glasses
Yes
Use - Safety Gloves
Use - Safety Boots
Use - Breathing Masks
Use - Ear Protectors
Page No 1
Right Angle Drills
UT8807B 3/8" Capacity
UT8807B-1/2
1/2" Capacity
3/8 10 30 10
800
Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,
Dismantling, Assembly and Safety Rules
Operator Instructions Important
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
Universal Air Tool Company Limited
Unit 8
Lane End Industrial Park
High Wycombe
Bucks
HP14 3BY
lbs
Kg
2.64 (3/8) 2.97 (1/2)
1.20 (3/8) 1.35 (1/2)
Vibration Level
Test Method Tested in accordance with ISO
standard 8662/1
Less than 2.5
Noise Level Sound Pressure Level 83.9 dB(A)
Test Method Tested in accordance with Pneurop
test code PN8NTC1 and ISO Standard 3744
Metres / Sec²
Summary of Contents
Page 1 - Work Stations
Manufacturer/Supplier Product TypeRPMCycles Per MinTel No Fax No(01494) 883300 (01494) 883237Model No/Nos Serial NoProduct Nett Weight Recommended Use
Page 2 - Reassembly
OperatingSelect suitable drill bit, insert the shank into the drill chuck as far aspossible and tighten chuck with key supplied making sure that thesh
Page 3 - UT8807B-1/2
UT8807BUT8807B-1/23/8" Capacity Angle Drill1/2" Capacity Angle DrillPage No 3Apr 1999 Ver 1.2Ref No Part No Description1 900418 Chuck Screw2
Page 4
DistributorNotesPage No 4Accessoriesand arrange for service and repair.15) If an additional side handle is fitted to the tool ensure that it iscorrect
Related products and manuals for Tools Universal-air-tools UT8807B-1/2
(4 pages)© 2020, manymanuals.com. All rights reserved. | 2.873 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals