Universal-air-tools UT8850A User Manual download pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Tel No

Fax No

(01494) 883300

(01494) 883237

Model No/Nos Serial No (if any)

Product Nett Weight

lbs

Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use Of Tool

This drill is designed for the purpose of drilling holes in all types of

materials, i.e. metals, wood, stone, plastics etc. using drilling bits

designed for this purpose. It may be used with other forms of cutting

tools, polishing devices or for sanding using coated abrasive products.

Before using any such products first check with the manufacturer their

suitability for use with this type of drill. Do not use bonded abrasive

products (i.e. grinding wheels) or saw blades or any device which has a

permitted safe working speed less than the free speed of the drill.

Do not use this drill for any other purpose than that specified without

consulting the manufacturer or the manufacturer's authorised supplier.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger

fully depressed. Use recommended hose size and length. It is

recommended that the tool is connected to the air supply as shown in

figure 1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve. The air

supply should be lubricated. It is strongly recommended that an air filter,

regulator, lubricator (FRL) is used as shown in Figure 1 as this will supply

clean, lubricated air at the correct pressure to the tool. Details of such

equipment can be obtained from your supplier. If such equipment is not

used then the tool should be lubricated by shutting off the air supply to

the tool, depressurising the line by pressing the trigger on the tool.

Work Stations

The tool should only be used as a handheld hand operated tool. It is

always recom-

mended that the

tool is used when

standing on the

solid floor. It can be

used in other posi-

tions but before any

such use, the oper-

ator must be in a se-

cure position having

a firm grip and foot-

ing and be aware

that the drill can de-

velop a torque reac-

tion see section

"Operating".

Page No 1

1/2 Capacity Pistol Grip

Drill

UT8850A

3.5

1.42 3/8 10 30 10

500

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

Noise Level

Sound Pressure Level 84.0 dB(A)

Test Method

Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Sound Power Level 93.24 dB(A)

Vibration Level

Test Method

Tested in accordance with ISO

standard 8662/1

Less than 2.5

Metres / Sec²

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Use - Safety Boots

Use - Breathing Masks

Use - Ear Protectors

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

1 2 3 4

Summary of Contents

Page 1 - Work Stations

Manufacturer/Supplier Product TypeRPMCycles Per MinTel NoFax No(01494) 883300(01494) 883237Model No/Nos Serial No (if any)Product Nett WeightlbsKgReco

Page 2 - Reassembly

OperatingSelect suitable drill bit, insert the shank into the drill chuck as far aspossible and tighten chuck with key supplied making sure that thesh

Page 3 - Ref No Part No Description

UT8850A 1/2 Capacity Pistol Grip DrillPage No 3Aug 2006 Ver 1.00Ref No Part No Description1 901511 Housing Cover2 731920 Hose Adapter3 931921 Screw (2

Page 4

DistributorNotesPage No 4Accessories8) Use safety equipment as recommended.9) The tool is not electrically insulated. Do not use where there is apossi

Comments to this Manuals

No comments

Universal-air-tools UT8850A User Manual

Browse online or download User Manual for Tools Universal-air-tools UT8850A. Universal Air Tools UT8850A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT8850A