Universal-air-tools UT8817 User Manual download pdf

Manufacturer/Supplier Product Type

RPM

Cycles Per Min

Tel No

Fax No

(01494) 883300 (01494) 883237

Model No/Nos Serial No (if any)

Product Nett Weight Recommended Use Of

Balancer Or Support

Recommended Hose Bore

Size - Minimum

Recommended Max.

Hose Length

Ins M/M Ft M

Foreseen Use Of Tool

This drill is designed for the purpose of drilling holes in all types of

materials, i.e. metals, wood, stone, plastics etc. using drilling bits

designed for this purpose. It may be used with other forms of cutting

tools, polishing devices or for sanding using coated abrasive products.

Before using any such products first check with the manufacturer

their suitability for use with this type of drill. Do not use bonded

abrasive products (i.e. grinding wheels) or saw blades or any device

which has a permitted safe working speed less than the free speed

of the drill.

Do not use this drill for any other purpose than that specified without

consulting the manufacturer or the manufacturer's authorised supplier.

Putting Into Service

Air Supply

Use a clean lubricated air supply that will give a measured air pressure

at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger

fully depressed. Use recommended hose size and length. It is

recommended that the tool is connected to the air supply as shown

in figure 1. Do not connect the tool to the air line system without

incorporating an easy to reach and operate air shut off valve. The air

supply should be lubricated. It is strongly recommended that an air

filter, regulator, lubricator (FRL) is used as shown in Figure 1 as this

will supply clean, lubricated air at the correct pressure to the tool.

Details of such equipment can be obtained from your supplier. If such

equipment is not used then the tool should be lubricated by shutting

off the air supply to the tool, depressurising the line by pressing the

trigger on the tool. Disconnect the air line and pour into the intake

bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating

Work Stations

The tool should only be used as a handheld hand operated tool. It is

always recommended that the tool is used when standing on the

solid floor. It can be

used in other posi-

tions but before

any such use, the

operator must be

in a secure position

having a firm grip

and footing and be

aware that the drill

can develop a

torque reaction

see section

"Operating".

Page No 1

3/8” Capacity Reversible

Pistol Grip Drill

UT8817

3/8 10 30 10

1,700

Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,

Dismantling, Assembly and Safety Rules

Operator Instructions Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Universal Air Tool Company Limited

Unit 8

Lane End Industrial Park

High Wycombe

Bucks

HP14 3BY

lbs

2.02

0.92

Noise Level

Sound Pressure Level 76.0 dB(A)

Test Method

Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Vibration Level

Test Method

Tested in accordance with ISO

standard 8662/1

Less than 2.5

Metres / Sec²

Personal Safety Equipment

Use - Safety Glasses

Yes

Use - Safety Gloves

Use - Safety Boots

Use - Breathing Masks

Use - Ear Protectors

Air Pressure

Recommended Working

6.3

bar

PSI

Recommended Minimum

n/a

bar

n/a

PSI

Maximum

7.0

bar

100

PSI

1 2 3 4

Summary of Contents

Page 1 - Work Stations

Manufacturer/Supplier Product TypeRPMCycles Per MinTel NoFax No(01494) 883300 (01494) 883237Model No/Nos Serial No (if any)Product Nett Weight Recomme

Page 2 - Reassembly

OperatingSelect suitable drill bit, insert the shank into the drill chuck as far aspossible and tighten chuck with key supplied making sure that thesh

Page 3 - Ref No Part No Description

UT8817 3/8” Capacity Reversible Pistol Grip DrillPage No 3Mar 2008 Ver 1.00Ref No Part No Description1 5L2100 Pistol Housing2 7Q2008 O-Ring3 2C2003 Bl

Page 4

DistributorNotesPage No 4AccessoriesDeclaration of ConformityUniversal Air Tool Company LimitedUnit 8, Lane End Industrial Park, High Wycombe, Bucks,

Comments to this Manuals

No comments

Universal-air-tools UT8817 User Manual

Browse online or download User Manual for Tools Universal-air-tools UT8817. Universal Air Tools UT8817 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Universal-air-tools UT8817