search

Universal-air-tools UT200A User Manual

Browse online or download User Manual for Tools Universal-air-tools UT200A. Universal Air Tools UT200A User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 0
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
ImportantOperator Instructions
Includes - Foreseen Use, Work Stations, Putting Into Service, Operating,
Dismantling, Assembly and Safety Rules
shut off valve. The air supply should be lubricated. It is strongly
recommended that an air filter, regulator, lubricator (FRL) is used as
shown in Figure 1 as this will supply clean, lubricated air at the correct
pressure to the tool. Details of such equipment can be obtained from
your supplier. If such equipment is not used then the tool should be
lubricated by shutting off the air supply to the tool, depressurising the
line by pressing the trigger on the tool. Disconnect the air line and
pour into the intake bushing a teaspoonful (5ml) of a suitable
pneumatic motor lubricating oil preferably incorporating a rust
inhibitor. Reconnect tool to air supply and run tool slowly for a few
seconds to allow air to circulate the oil. If tool is used frequently
lubricate on daily basis and if tool starts to slow or lose power.
It is recommended that the air pressure at the tool whilst the tool is
running is 90 p.s.i./6.3 bar. The tool can run at lower and higher
pressures with the maximum permitted working air pressure of 100
p.s.i./7 bar.
Manufacturer/Supplier Product Type
RPM
Cycles Per Min
Model No/Nos Serial No
Product Nett Weight
lbs
Kg
Recommended Use Of
Balancer Or Support
Recommended Hose Bore
Size - Minimum
Recommended Max.
Hose Length
Ins M/M Ft M
No
Page No 1
Air Spot Weld Removal
Tool
UT200A
3.3
1.5 3/8 10 30 10
1,400
Work Stations
The tool should only be used as a handheld hand operated tool. It is
always recommended that the tool is used when standing on the
solid floor. It can be used in other positions but before any such use,
the operator must be in a secure position having a firm grip and
footing and be aware that the drill can develop a torque reaction.
Foreseen Use of the Tool
The Spot Weld Removal Tool is designed for the purpose of removing
spot welds on automotive body panels. Do not use the tool for any
purpose other than spot drilling unless first seeking the advice of the
manufacturer or the manufacturer’s authorised representative.
Putting Into Service
Air Supply
Use a clean lubricated air supply
that will give a measured air
pressure at the tool of 90
p.s.i./6.3 bar when the tool is
running with the trigger/lever fully
depressed. Use recommended
hose size and length. It is
recommended that the tool is
connected to the air supply as
shown in figure 1. Do not
connect the tool to the air line
system without incorporating an
easy to reach and operate air
Noise Level Sound Pressure Level 83.5 dB(A)
Test Method Tested in accordance with Pneurop
test code PN8NTC1 and ISO Standard 3744
Vibration Level
Test Method Tested in accordance with ISO
standards 8662/1
Less than 2.5
Universal Air Tool Company Limited
Unit 8
Lane End Industrial Park
High Wycombe
Bucks
HP14 3BY
Tel No
Fax No
(01494) 883237
Metres / Sec²
Air Pressure
Recommended Working
6.3
bar
90
PSI
Recommended Minimum
n/a
bar
n/a
PSI
Maximum
7.0
bar
100
PSI
Personal Safety Equipment
Use - Safety Glasses
Yes
Use - Safety Gloves
Yes
Use - Safety Boots
Use - Breathing Masks
Use - Ear Protectors
Yes
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Air Supply

Read these instructions carefully before installing, operating,servicing or repairing this tool. Keep these instructions in a safeaccessible place.Imp

Page 2 - Reassembly

Page No 2Safety Rules For A Spot Weld Remover1) Read all the instructions before using this tool. All operators mustbe fully trained in its use and aw

Page 3 - Air Spot Weld Removal Drill

UT200AAir Spot Weld Removal DrillPage No 3Jan 2006 Ver 1.00Ref No Part No Description1 608A0001 Inlet Bushing2 608A0002 Batten-Ji fixed pian3 608A0003

Page 4

NotesPage No 4AccessoriesDeclaration of ConformityUniversal Air Tool Company LimitedUnit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, E

Comments to this Manuals

No comments
Related products and manuals for Tools Universal-air-tools UT200A
Tools Universal-air-tools UT190R (3/16) User Manual   (4 pages)
Tools Universal-air-tools UT176RL User Manual   (4 pages)
Tools Universal-air-tools UT616BN User Manual   (4 pages)
Tools Universal-air-tools UT1054 User Manual   (4 pages)
Tools Universal-air-tools UT50PP-A User Manual   (4 pages)
Tools Universal-air-tools UT079 (HP079) User Manual   (4 pages)
Tools Universal-air-tools UT57A User Manual   (8 pages)
Tools Universal-air-tools HP003 User Manual   (1 pages)
Tools Universal-air-tools UT53NG User Manual   (4 pages)
Tools Universal-air-tools UT021A (HP021) User Manual   (4 pages)
Tools Universal-air-tools HP002PGT User Manual   (4 pages)
Tools Universal-air-tools HP001T User Manual   (4 pages)
Tools Universal-air-tools HP002PG User Manual   (1 pages)
Tools Universal-air-tools UT5762 User Manual   (4 pages)
Tools Universal-air-tools HP002 User Manual   (1 pages)
Tools Universal-air-tools HP001 User Manual   (1 pages)
Tools Universal-air-tools UT5920 (UT8920A) User Manual   (4 pages)
Tools Universal-air-tools UT5761 User Manual   (4 pages)
Tools Universal-air-tools UT8606 User Manual   (4 pages)
Tools Universal-air-tools UT4X (4X) User Manual   (4 pages)
  • SunBriteTV Vollrath Doremi Church Organ World NotaTech
  • CDA Water dispensers ISymphony Headphones Epson Car kits Panduit Hand tools supplies Magnavox Gaming controls
  • Aastra 51I IP PHONE - Nikon Coolpix S220 Sony NEX-F3K Lenovo B50-30
  • Jvc CS-MX624 User Manual Toshiba Satellite M40 (PSM40) User Manual Samsung LA46C530F1R User Manual Samsung SGH-D880 User Manual LG LS-P1260BB User Manual